To perform a recovery using ASR: Boot the server from the Windows Server installation CD. Press F2 when you see the message 'Press F2 to run Automated System Recovery (ASR)'. Insert the ASR floppy disk when prompted. The ASR restore process will format the C: drive and start the Windows Server installation process. After a reboot, the Automated System Recovery Wizard will open. Confirm the location of the backup. NTBackup will then restore the data to the C: drive. BackupAssist bare-metal backup and recovery Windows Server includes basic backup and recovery tools, but the functionality they provide falls short of what most businesses require. BackupAssist has been a leader in Windows Server protection since 2002 and includes the features needed to ensure you have the right backups and successful, predictable recoveries. This table lists some of the key features that an effective backup strategy needs, and compares the solutions provided by Windows Server and BackupAssist. Features Windows Server BackupAssist Ransomware protection Not included.
Bare metal restore is the most important feature on NetBackup software, it helps to restore the data on the computer without having previously installed software or operating system. Bare Metal restore requires the following. The following is to perform a bare metal restore on a same machine which went down, Netbackup verify the ip address, client name and Mac address before restoring the client. It also requires reverse DNS to restore client. Follow the steps to do the Bare Metal Restoring: 1. Symantec Bare Metal Server Setup. 2. Shared Resource Tree. 3. Backup Policy. 4. Prepare to Restore i. Same Machine. ii. Different Machine. 4. Symantec NetBackup Boot CD. 5. Bare Metal Restore. Make sure that backup policy has bare metal restore option checked. Optional to backup all drives. If you have both option enabled on a backup policy, backup client will be displayed on Bare Metal Restore client after a completion of Full backup. Right click on a client which you want to restore and select Prepare To Restore..
Firstly, check that you have all you need to perform bare metal recovery. The Disaster Recovery utility. You can obtain it freely from Handy Backup (for users of all editions except Standard and Free for Cloud). A USB drive with a copy of this bare metal backup software, which you make from the program during installing the Disaster Recovery tool. A copy of your Windows, Linux or data drive, taken by bare metal backup or by Handy Backup itself, to restore on a scratch hard drive. An empty or scratch hard drive or a computer containing it to perform bare metal recovery. Load a target computer from a USB device containing the Disaster Recovery utility and your hard drive copy file. After booting up, you will see the Disaster Recovery desktop. Now please follow the next sequence of actions. Open the Tasks window by clicking twice on the icon. On the toolbar, click New Task. You will see the New Task dialog window. Here, specify a name for a task in the Name field. Select Restore task type.
However, this can be easily fixed by using dissimilar hardware restore technology — Acronis Universal Restore. Dissimilar Hardware Restore Dissimilar hardware restore is designed to address boot-critical hardware changes. This amazing technology can reconfigure your operating system without booting by changing settings and injecting and activating drivers to ensure the operating system boots. Acronis invented this technology and brought it to the market in 2006. Since then, Acronis has been perfecting the technology, which now lets you restore a disk-image to any dissimilar hardware — even virtual and cloud! Acronis Universal Restore – How It Works After recovering your disk-image as-is, Acronis Universal Restore analyzes the new hardware platform and tunes the Windows or Linux settings to match the new requirements. CPU: Acronis Universal Restore analyzes the change in CPU type (Intel or AMD), the number of CPUs (single-CPU or SMP (Symmetric Multiprocessing)), and changes the settings of the operating system to match.
Blank CD and CD burning software VNC viewer (optional) Windows 7 PE (32-bit) compatible storage drivers and network adapter drivers for the target machine Storage controller, RAID, AHCI, and chipset drivers for the target operating system NOTE: The storage controller drivers are only needed if the restore being performed is to dissimilar hardware. Create a Boot CD On the Tools tab of the Core Console, select the Boot CDs menu. In the Actions menu at the right of the screen, select Create Boot CD. In the Output Path text box, enter a name for the Boot CD ISO. NOTE: What you enter here is the ISO path where to store the boot image on the Core server. If the share on which you want to store the image is low on disk space, you can set the path as needed; for example, D:\ Also note the file extension must be When specifying the path, use only alphanumeric characters, the hyphen, and the period (only to separate host names and domains). The letters a to z are case-insensitive. Do not use spaces.
Enter the location's details and RecoverAssist will scan that location for image backups. Choose the backup you want to use. Click Next and follow the prompts to start the recovery. Recover Windows Server 2019, 2016, 2012 or 2008 using the WinRE The Windows Recovery Environment (WinRE) is used to start a server so you can perform system repairs or a recovery. To perform a recovery using WinRE: Boot the server from the Windows Server DVD. Specify your language and time, and click Next. Click Repair your computer and WinRE will launch. Click Restore your computer using a system image that you created earlier. Click Next and the computer will search for a backup image. Choose Use the latest available system image (recommended) or Select a system image. If you chose Select a system image, select the backup that you want to use. Click Finish and then Yes when prompted to start the recovery process. Recover Windows Server 2003 using Automated System Recovery Automated System Recovery (ASR) can be used to restore a server's system drive and any applications and data on that drive.
Bare Metal Restore Using an Image Backup Unless you want to go through the daunting task of reinstalling every piece of software, including your operating system manually, you will want the help of a bmr backup software solution that can perform a bare metal restore from an image backup. The term Image backup, is also referred to as a disaster recovery backup, bare metal backup, ghost backup, image-level backup, disk imaging, block level backup, or a clone of your machine. If you can get past all of the names, it's actually a pretty simple type of backup that essentially creates an exact copy or clone of your computer's hard disk at the time of the backup. This type of backup creates a snapshot of your entire system and includes everything: your operating system, applications, preferences, email settings, and data. An image backup is a very simple to configure type of backup where you normally have to just select an entire drive, partition, or entire machine which typically backs up everything that you have selected.
by acinto, on Sep 18, 2014 11:11:01 AM Bare metal restore is the restoring of your entire system (PC or server) from scratch with a completely blank hard drive. It refers to the literal "bare metal" hardware, void of any previously installed software or operating system, as the starting point for recovery. A bare metal restore is often needed after a catastrophic hard drive failure, which results in the need to either install a new hard drive or wipe the existing hard drive clean so that a user is essentially starting over with a blank hard drive. In order to perform a bare metal recovery, you need to have performed a bare metal backup (bmr backup) first. Here are a few scenarios where a bare metal restore may be needed: Hard drive failure or system crash Windows won't boot up (system error) Lost or stolen laptop Server hardware refresh Transition from physical to virtual servers Purchased new PC or laptop Transition from HHD to SSD Blue screen of death Software upgrade disaster Virus that corrupts Windows An image backup can be used to do a Bare Metal Restore.
Click Close. Install the Windows PE Add-On for ADK Run from your computer to install the Windows PE add-on for the ADK. Select Install the Windows Assessment and Deployment Kit Windows Preinstallation Environment Add-ons - Windows 10 to this computer using the default Install Path. After the installation has completed successfully, click Close. Prepare Additional Drivers for Inclusion in the BMR ISO (Optional) If the system you are trying to recover depends on drivers that are not included in Windows PE by default, you can include additional drivers in the BMR ISO. To include additional drivers in the BMR ISO: Create a single folder or directory to hold the included drivers (e. g., C:\drivers-for-bmr). Download the necessary drivers from the hardware vendor. Extract the drivers if they are in a self-extracting archive or a ZIP file. Note the location of the extracted folder. Inspect the extracted files to ensure there is at least one INF file to include in the BMR ISO. Copy the extracted drivers in the folder from Step 3 into the directory you created in Step 1.